Industrial Control & Protection
Datavision industrial control switch works by opening and closing different sets of contacts. Switch controlled systems are connected to these contacts and then controlled by the selection knob on the front of the switch. The number of contacts depends on the application of the industrial control switch. If the switch is doing something basic, such as turning a system on and off, then there might only be one or two sets of contacts in use. For more complicated applications, there could be 30-40 sets of contacts in use. The industrial control switch is much more durable and robust than a standard switch.
LRS-100 series is a 100W single-output enclosed type power supply with 30mm of low profile design. Adopting the full range 85~264VACinput, the entire series provides an output voltage line of 3.3V,5V,12V,15V, 24V,36V and 48V.
LRS-350 series is a 350W single-output enclosed type power supply with 30mm of low profile design. Adopting the input of 115VAC or 230VAC( select by switch) , the entire series provides an output voltage line of 3.3V, 4.2V, 5V, 12V, 15V, 24V, 36V and 48V.
LRS-35 series is a 35W single-output enclosed type power supply with 30mm of low profile design. Adopting the full range 85~264VAC input, the entire series provides an output voltage line of 3.3V,5V,12V, 15V,24V,36V and 48V.
Single set of 480W guideway switching power converter 24V20A DC transformer
WDR-60 series is a 60W DIN rail power supply with ultra-wide AC input range.
ELG-75 series is a 75W AC/DC LED driver featuring the dual mode constant voltage and constant current output
NOARK® Electric Ex9C contactors are intended for various applications including heavy industrial loads. Nine frame sizes allow optimization of electrical parameters and mechanical dimensions. A range of overload relays are available in a variety of frame sizes to fit respective contactors of given rated current. 5-Year limited warranty.
NDR-75 is one economical slim 75W Din rail power supply series, adapt to be installed on TS-35 / 7.5 or TS-35 / 15 mounting rails.
The emergency pull-wire switches have an integrated wire break monitoring function.Most emergency pull-wire switches have a robust metal housing. A wide range of accessories is available for all product types.